Visonic PowerMax10 Podręcznik Użytkownika Pobierz pdf (Strona 30)

MENUS AND FUNCTIONS

D-302757 29

C.10 Programming Private Phone Numbers

The PowerMax10-G2 system allows you to determine which event groups will be reported to private telephone

subscribers. The PowerMax10-G2 system can also be programmed by the installer to report various event

messages such as alarm, arming or trouble, to 4 private telephone subscribers and to 4 SMS telephone

numbers either instead of or in addition to the reports transmitted to the monitoring company. You can

determine the number of times the private telephone number is dialed and whether to use a single

acknowledge signal or an acknowledge signal from each telephone before the current event is considered

reported.

Reported events and the number of reported attempts are programmed in the "Installer Settings" (for further

details see Chapter 6 in this manual).

♦ Here you can program the 1

, 2

, 3

, and 4

private telephone numbers for reporting alarm and other event

messages to private subscribers.

♦ Here you can program the 1

, 2

, 3

, and 4

SMS telephone numbers for reporting alarm and other event

messages to private subscribers.

Carefully read the section titled "Additional Information" according to the indicated references

etc – see table

at end of this section.

{

a) Enter the USER SETTINGS menu and select the [PRIVATE REPORT]

option.

b) When the display reads [PRIVATE REPORT] press

OKI

The display will read [REPORT TO PRVT].

c) Press

OKI

Click the

or button until the display reads the event

group you wish to be reported, for example, "alarms".

Select between: "disable report"; "all"; "all (-op/cl)" (all messages except

opened/closed); "all (-alerts)" (all messages except alerts); "alarms";

"alerts"; "op/cl" (opened/closed).

}

When you are satisfied with the setting, press

OKI

to confirm.

OKI

A "Happy Tune" ☺ sounds to confirm the set event to be reported.

☺

{

a) Click the

or button until the display reads [SMS

REPORT TEL#].

b) When the display reads [SMS REPORT TEL#] press

OKI

a) Click the

or button until the display reads the

desired SMS phone number you wish to program or edit, for

example, "4th SMS tel #".

A. To Program Event Group Report

B. To Program SMS Telephone Numbers

MS REPORT TEL#

1st SMS tel#

alarms

REPORT TO PRVT

all

REPORT TO PRVT

RIVATE REPORT

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 49 50

Komentarze do niniejszej Instrukcji

Brak uwag

Visonic PowerMax10 Podręcznik Użytkownika Strona 30

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Visonic PowerMax10