Visonic POWERMASTER-10 - INSTALLER GUIDE Podręcznik Użytkownika Pobierz pdf (Strona 13)

OPERATING THE POWERMASTER SYSTEM

12 D-303223 PowerMaster-10/30 G2 User's Guide

PRESS

RESULTING DISPLAY

PANIC ALARM

simultaneously

READY HH:MM

To stop the alarm, press the

button

and then key in your valid user code.

Initiating Fire Alarm

or Emergency Alarm

You can generate a fire alarm or a silent emergency alarm in disarmed & armed states, as follows:

PRESS

RESULTING DISPLAY

FIRE ALARM

EMERGENCY

for 2 seconds

Then, if or when the

system is in the disarmed

state:

READY HH:MM

(alternating)

READY MEMORY

To stop the alarm, press and then key in your valid user code.

Note: For UL Listed product, Emergency is ancillary use only.

Chime ON/OFF

Disable / enable the chime zones (see Appendix C) by alternate clicking of the key, as shown below:

PRESS

RESULTING DISPLAY

CHIME ON

CHIME OFF



READY HH:MM

CHIME indicator lights steadily when “chime on” is selected.

Note: For UL Listed Product, the Chime setting must be set to “Chime ON”.

Adjusting the Speech Volume

and the Volume of the Beeps

The following diagrams show how to increase or decrease the loudness by clicking the <1> or<4> key

(assuming that the volume was at minimum/maximum to begin with).

PRESS

RESULTING DISPLAY

PRESS

RESULTING DISPLAY

VOLUME+

(max)

VOLUME–

VOLUME+

VOLUME–

VOLUME+

VOLUME–

(max)

VOLUME+

VOLUME–

This function is disabled in ACPO compliant version

Refers to PowerMaster-30 G2 with voice option only

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 61 62

Komentarze do niniejszej Instrukcji

Brak uwag

Visonic POWERMASTER-10 - INSTALLER GUIDE Podręcznik Użytkownika Strona 13

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Visonic POWERMASTER-10 - INSTALLER GUIDE