Visonic POWERMASTER-10 Podręcznik Użytkownika Pobierz pdf (Strona 24)

REVIEWING TROUBLES AND ALARM MEMORY

D-303223 PowerMaster-10 / PowerMaster-30 User's Guide 23

Clearing the Memory Indication

To clear the ‘Memory’ indication you must first review the cause of alarm as described above. Once you return

to the ‘Ready’ screen simply press Away

and enter the code if requested, then press Disarm

followed by the code. The memory message will now clear. Otherwise the memory indication and content will be

cleared upon the next arming of the system.

Troubles

A. Indication of Trouble condition

If the system detected a trouble condition in any of the enrolled devices, the TROUBLE indicator illuminates, 3

beeps are sounded once per minute and a flashing TRBL message is displayed, as follows.

READY HH:MM

(alternating)

READY TRBL

or, if the system is not ready for arming -

NOT READY HH:MM

(alternating)

NOT READY TRBL

B. Displaying Trouble Information

All trouble messages need to be reviewed and corrected as described below:

EXAMPLE: The kitchen device - zone No. 9 - has reported a low battery – the living room device zone No. 15 -

has been inactive, and an attempt to communicate a message to your telephone has failed. However, these

troubles do not prevent the system from being “ready to arm”.

To review the source of the current troubles one by one, click the button repeatedly as shown below:

PRESS RESULTING DISPLAY

POWERMASTER-10

∗

Z09 LOW BATTERY

(alternating)

Z09 CONTACT

(alternating)

KITCHEN

↓

Z15 MISSING

(alternating)

Z15 MOTION SENS.

(alternating)

LIVING ROOM

↓

COMM. FAILURE

↓

READY HH:MM

∗

When working from the PowerMaster-30 control panel, the display will read "PowerMaster-30".

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 75 76

Komentarze do niniejszej Instrukcji

Brak uwag

Visonic POWERMASTER-10 Podręcznik Użytkownika Strona 24

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Visonic POWERMASTER-10