Visonic POWERMASTER-10 Podręcznik Użytkownika Pobierz pdf (Strona 30)

MENUS AND FUNCTIONS

D-303223 PowerMaster-10 / PowerMaster-30 User's Guide 29

C.1 Setting the Zone Bypass Scheme

Bypassing permits arming only part of the system while allowing free movement of people within certain zones

when the system is armed.

It is also used to temporarily remove from service faulty zones that require repair work or to deactivate a sensor

if, for example, you are decorating a room.

♦ Here you can set the Zone Bypass Scheme i.e. to scroll through the list of registered (enrolled) sensors to

your PowerMaster-10 / PowerMaster-30 system and to Bypass (deactivate) faulty or disturbed sensors

(either READY or NOT-READY) or to Clear (reactivate) BYPASSED zones (sensors).

Once you have set a Bypass Scheme you can use the following 3 options:

> To quickly review the bypassed zones – refer to section C.2.

> To quickly clear a bypassed zone i.e. to reactivate the bypassed zone – refer to section C.2.

> To repeat (recall) the last used zone bypassing scheme – refer to section C.3.



1. Zones will be bypassed throughout one disarm-arm period only. Disarming the system after arming will

suspend the entire bypassing scheme but you can recall and reuse it as described in section C.3.

2. Fire zones cannot be bypassed.

3. Carefully read the section titled "Additional Information" according to the indicated references

etc –

see table at end of section C.3.

REMEMBER – ZONE BYPASSING COMPROMISES SECURITY!

A. To Bypass a Zone

Enter the USER SETTINGS menu and select the [SET ZONE BYPASS] option

and press the button to confirm.

The first zone, Z01, is displayed.

Click the or button until the display reads the zone you

wish to bypass (or clear bypass), for example, "Z04" for Zone 04. After

several seconds the LED on the respective device starts flashing indicating

"it's me".

When the display reads the zone you wish to bypass press to

confirm.

The display now reads [<OK> TO BYPASS].

To bypass the selected zone press

A "Happy Tune"



☺ sounds and the updated zone status is now displayed

i.e. [

Z04: BYPASSED

K> TO BYPASS

Kitchen

Z04: NOT READY

Living Room

Z01: READY

SET ZONE BYPASS

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 75 76

Komentarze do niniejszej Instrukcji

Brak uwag

Visonic POWERMASTER-10 Podręcznik Użytkownika Strona 30

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Visonic POWERMASTER-10