Visonic POWERMASTER-10 Podręcznik Użytkownika Pobierz pdf (Strona 44)

MENUS AND FUNCTIONS

D-303223 PowerMaster-10 / PowerMaster-30 User's Guide 43

C.11 Programming Private Phone and SMS Reporting

The PowerMaster-10 / PowerMaster-30 system can be programmed to send various event notification

messages such as alarm, arming or trouble events, to 4 private telephone subscribers by audible signal and if a

GSM option is installed, also to 4 SMS telephone numbers. These reports can be programmed either instead of

or in addition to the reports transmitted to the monitoring company.

Further details about the event notification by telephone and by SMS are provided in Chapter 7. Event

Reporting and Control by Telephone and SMS.

You can also determine the number of times the private telephone number is dialed and whether a single

acknowledge signal will stop the reporting process or an acknowledge signal from each telephone will be

required before the current event is considered reported.

Here you can program:

The specific events you wish the system to report.

The 1

, 2

, 3

, and 4

private telephone and SMS numbers for reporting alarm and other event messages to

private subscribers.

The number of redial attempts, two-way voice communication

∗

, and whether to use a single acknowledge signal

or an acknowledge signal from each telephone before the current event is considered reported.



Carefully read the section titled "Additional Information" according to the indicated references

etc – see

table at end of this section.

VOICE REPORT

A. To Program Events to be Reported by private telephone

Enter the USER SETTINGS menu and select the [PRIVATE REPORT] option

and press the button to confirm.

The display will read [VOICE REPORT] which is the first option used to

enable Private Reporting, to determine which events will be reported and to

program private telephone numbers.

To enter this option press

When the display reads [REPORTED EVENTS] press .

The display shows the currently selected option.

Click the or button until the display reads the event group

you wish to be reported via private phones, for example, [alarms].

When you are satisfied with the setting, press to confirm.

☺ Return to step 3

A "Happy Tune" ☺ sounds. The display confirms the set events to be

reported, and returns to step 3.

4, 12

B. To Program a Private Phone

Click the

or button until the display reads the desired

Telephone No. you wish to program or edit, for example, "2nd private

tel#", and press

to confirm.

∗

Refers to PowerMaster-30 with voice option only

REPORTED EVENTS

alarms



alarms

VOICE REPORT

2nd private tel#

disable report



PRIVATE REPORT

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 75 76

Komentarze do niniejszej Instrukcji

Brak uwag

Visonic POWERMASTER-10 Podręcznik Użytkownika Strona 44

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Visonic POWERMASTER-10