search

Visonic POWERMASTER-10 Podręcznik Użytkownika Strona 27

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 76
  • Spis treści
  • BOOKMARKI
    • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 26
MENUS AND FUNCTIONS
26 D-303223 PowerMaster-10 / PowerMaster-30 User's Guide
B.1 Entering the User Settings Menu & Selecting a Setting Option
The following procedure describes how to enter and move within the User Settings menu.
Detailed descriptions of the User Setting options are provided at the end of the procedure.
To exit the User Settings menu – see section B.2.
1. You can enter the "User Settings" menu only when the system is disarmed.
2. Carefully read the section titled "Additional Information" according to the indicated references
1
etc – see
table at end of this section.
Note: Except for specific reference to PowerMaster-30 functions, the buttons displayed throughout the User's
Guide are of the PowerMaster-10 control panel. When using the PowerMaster-30 control panel, these buttons
can be interchanged.
A. To Enter the User Settings Menu
1.
Make sure the system is disarmed and then press the button
repeatedly until the display reads "USER SETTINGS".
1
2.
Press to confirm
The screen will now prompt you to enter your user code.
3.
CODE
Enter your User Code.
2
The display reads the first Setting option of the User Settings menu
[SET BYPASS].
3
B. To Select a Setting Option
4.
or
Click the or button until the display reads the desired
setting option, for example, "TIME & FORMAT".
5.
When the desired setting option appears on the display, press the
button to enter the setting process.
Continue to the selected
setting option in C.1 - C.14
The remainder of the procedures for the selected setting options is provided
in sections C.1 to C.14.
Additional Information (section B.1)
1
Display shown in disarm state when all zones are secured (00:00 or other digits show present time).
2
a. If you have not already changed your personal code number, use the default setting – 1111.
b. The Master User has access to all User Settings options. All other users have access only to the
Bypass options.
c. Do not set any user code the same as an installer code.
3
The bypass options will be displayed in the User Settings menu only if enabled by the installer. Otherwise,
the first user setting option displayed will be [
USER CODES
].
SET BYPASS
SET BYPASSSET BYPASS
SET BYPASS
TIME & FORMAT
TIME & FORMATTIME & FORMAT
TIME & FORMAT
SET BYPASS
SET BYPASSSET BYPASS
SET BYPASS
ENTER CODE:
ENTER CODE:ENTER CODE:
ENTER CODE:
USER SETTINGS
USER SETTINGSUSER SETTINGS
USER SETTINGS
READY 00:00
READY 00:00READY 00:00
READY 00:00
Przeglądanie stron 26
1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 75 76

Komentarze do niniejszej Instrukcji

Brak uwag
Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Visonic POWERMASTER-10
Systemy kontroli dostępu bezpieczeństwa Visonic POWERMASTER-10 Podręcznik Użytkownika   (96 strony)
Systemy kontroli dostępu bezpieczeństwa Visonic PowerMax Partitions II Instrukcja Użytkownika   (27 strony)
  • PoGo Products Mfuel SafeFlame In Win BCoda
  • HP Terminale POS Audiovox Tunery telewizji komputerowej Targus Interfejsy kablowe / adaptery Netgear Konwertery mediów sieciowych Quantum Networking
  • Sony NWZ-S765 Sonic-alert DB200 Acer GD235HZ
  • Electrolux EWT0862TDW Arkusz Informacyjny Brother HL 5250DN Instrukcja Użytkownika Samsung GT-E2210B Instrukcja Użytkownika Speed Queen STENCASP175TW01 Arkusz Specyfikacji Kenwood FP126 Instrukcja Obsługi