Visonic POWERMASTER-10 Podręcznik Użytkownika Pobierz pdf (Strona 43)

MENUS AND FUNCTIONS

42 D-303223 PowerMaster-10 / PowerMaster-30 User's Guide

C.9 Enabling / Disabling Auto-Arming

The PowerMaster-10 / PowerMaster-30 system can be programmed to automatically arm itself on a daily basis

at a predetermined time. This feature is useful especially in commercial applications, such as in stores, to

ensure that the system is always armed and without having to assign security codes to employees.

♦ Here you can enable (activate) and disable (stop) the Auto-Arming. To set the Auto-Arming time –

see section C.10.



Carefully read the section titled "Additional Information" according to the indicated references

etc – see

table at end of this section.

Enter the USER SETTINGS menu, select the [AUTO-ARM ENABLE] option

and press the button to confirm.

The display shows the currently selected setting.

or Click the or button until the display reads the desired

setting, for example, "enable autoarm" and press to confirm.

☺ Return to step 1

A "Happy Tune" ☺ sounds. The display confirms the saved setting, and

then returns to the User Setting menu, step 1.

C.10 Setting the Auto-Arming Time

♦ Here you can program the exact time of the Auto-Arming.

Enter the USER SETTINGS menu, select the [AUTO-ARM TIME] option and

press the button to confirm.

The display shows the current setting of the Auto-Arm Time. At the blinking

cursor position, enter the correct time, for example, “8:30A”, using the

numerical keypad.

When you are satisfied with the setting, press to confirm.

☺ Return to step 1

A "Happy Tune" ☺ sounds. The display confirms the saved time, then

returns to the User Setting menu, step 1.

5, 6

Additional Information (section C.9 - section C.10)

For detailed instructions on how to select User Settings – refer to section B.1 and section B.2.

The display shows the current setting (indicated by a



symbol), for example, "

disable autoarm

". You

can now select either to enable or disable auto-arming using the or button.

The



symbol now appears next to the newly selected option.

The display shows the current setting of the Auto-Arm Time, for example, "

12:00 PM

", with the cursor

blinking on the first hour digit "1". For detailed explanation of how to set the time - refer to Section C.7 B.

The saved auto arm time is displayed without the cursor, for example, "

08:30 A

You can now select another option in the User Setting menu (see section B.1 and section B.2), or quit

programming (see section B.3).

TIME 08:30A

arm time 12:00P

AUTO

ARM TIME

enable autoarm



dis

able autoarm



AUTO

ARM ENABLE

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 75 76

Komentarze do niniejszej Instrukcji

Brak uwag

Visonic POWERMASTER-10 Podręcznik Użytkownika Strona 43

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Visonic POWERMASTER-10