Visonic POWERMASTER-10 Podręcznik Użytkownika Pobierz pdf (Strona 50)

MENUS AND FUNCTIONS

D-303223 PowerMaster-10 / PowerMaster-30 User's Guide 49

The display shows the current setting of the start time.

Use the numerical keypad to set or change the operation ON (start) time, for

example, “00:30P”.

When you are satisfied with the setting, press to confirm.

☺ Go to step 10

A "Happy Tune" ☺ sounds. The display confirms the saved start time and

returns to the "start time" screen as in step 7.

To set the stop time, continue to step 10.

E. To Set the OFF (Stop) Time

10.

Click the or button until the display reads "Stop-HH:MM".

11.

When the display read the desired setting, press to confirm.

The "stop time" of the selected operation is displayed.

12.

Use the numerical keypad to set or change the operation OFF (stop) time,

for example, “04:00P”.

When you are satisfied with the setting, press to confirm.

☺ Return to step 5

A "Happy Tune" ☺ sounds. The display confirms the saved stop time and

returns to the "operation No" screen, as in step 5.

Additional Information (section C.13)

For detailed instructions How to select the Setting Options – refer to section B.1 and section B.2.

If you wish to activate the selected device on every day of the week at the same time(s), use the "Daily"

option. Otherwise, use the or buttons to select the specific day (Sunday, Monday,

Tuesday…etc) you wish to activate the PGM output. You can later repeat the process for other days of

the week, if desired.

The display shows "

operation No 1

" which is the first of the 4 ON/OFF time activations you can

schedule for the day selected in the previous step. You can later repeat the process for the other 3

activations on the selected day, if desired.

Here you can select either the "start time" or "stop time" using the or button. Select the

time in 10 minute intervals only. To erase a displayed time, press the button.

The screen also displays the selected time format.

The display shows the current start (or stop) time setting of the selected activation with the cursor blinking

on the first hour digit. If no time is programmed, the time display will be blank (- -:- - - ).

For detailed explanation of how to set the time - refer to Section C.7 B.

To end this session and return to the previous "operation" menu, press the button.

To select other menu options or to quit programming, follow the instructions in sections B.2 and B.3.

Stop



1:30P

Stop

HH:MM

Start

HH:MMP

Stop

04:00P

Start

00:30P

Start

7:30A

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 75 76

Komentarze do niniejszej Instrukcji

Brak uwag

Visonic POWERMASTER-10 Podręcznik Użytkownika Strona 50

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Visonic POWERMASTER-10